We post some inquires form our clients here in order to show you our products are well sold.

But to protect the the privacy of clients, the company or personal info are hidden.

】】】】】】】】】】】】】】

Good morning Peter

We would like to have a price quote

for the supply and minimum quantity for delivery in our warehouses (France 69290)

Tape 30mm * 66M / roll

Tape 50mm * 66M / roll

EVA THERMAL CUTTER

BLADE REF 11.1

Thank you for giving us the deadline.

Good reception

】】】】】】】】】】】】】】】】

【SHOWCASE OF INQUIRIES】

We post some inquires form our clients here in order to show you our products are well sold.

But to protect the the privacy of clients, the company or personal info are hidden.

Peter Lin, cnc@cncGlass.com,

cnc@cncEVA.com

Whatsapp: 0086 15013829504,

WeChat: WeCan365

www.cncglass.com  www.cnceva.com

We post some inquires form our clients here in order to show you our products are well sold.

But to protect the the privacy of clients, the company or personal info are hidden.

】】】】】】】】】】】】】】

Good morning Peter

I am looking for some information on your hot knives for EVA/PVB interlayers.

Can you please advise if you ship to Australia and if you have a product that works on 240V

Kind regards

】】】】】】】】】】】】】】】】

【SHOWCASE OF INQUIRIES】

We post some inquires form our clients here in order to show you our products are well sold.

But to protect the the privacy of clients, the company or personal info are hidden.

Peter Lin, cnc@cncGlass.com,

cnc@cncEVA.com

Whatsapp: 0086 15013829504,

WeChat: WeCan365

www.cncglass.com  www.cnceva.com

CNC02-Continuously-Working Thermal Cutter
is available for
high point temperature adjustment,
16 sections of temp to set.

Peter Lin, cnc@cncGlass.com,
cnc@cncEVA.com
Whatsapp: 0086 15013829504,
WeChat: WeCan365
www.cncGlass.com www.cncEVA.com

Differences between CNC02 and CNC01:

*CNC02-Continuously-Working Thermal Cutter is designed for continuously working with air cooling system, while CNC01-Intermittently-Working is only for short time working, you need to release the button intermittently for cooling after short time heating in case itself gets too hot.

*CNC02-Continuously-Working is able to trim the edges with minimum of smoke and no burned marks.

*CNC02-Continuously-Working is lighter ,only 610g, easier to handle, while CNC01 is 950g.

*CNC02-Continuously-Working is available for high point temperature adjustment, 16 sections of temp to set. So you don’t need to let the blades going up to 500C degrees each time you use it, you may only set the lower temperature(for example about 300C degrees) only if it’s high enough for you to trim interlayer remains, so you can prolong the life time of the blades, and save cost.

CNC02-Continuously-Working Thermal Cutter
is available for
high point temperature adjustment,
16 sections of temp to set.

Peter Lin, cnc@cncGlass.com,
cnc@cncEVA.com
Whatsapp: 0086 15013829504,
WeChat: WeCan365
www.cncGlass.com www.cncEVA.com

Differences between CNC02 and CNC01:

*CNC02-Continuously-Working Thermal Cutter is designed for continuously working with air cooling system, while CNC01-Intermittently-Working is only for short time working, you need to release the button intermittently for cooling after short time heating in case itself gets too hot.

*CNC02-Continuously-Working is able to trim the edges with minimum of smoke and no burned marks.

*CNC02-Continuously-Working is lighter ,only 610g, easier to handle, while CNC01 is 950g.

*CNC02-Continuously-Working is available for high point temperature adjustment, 16 sections of temp to set. So you don’t need to let the blades going up to 500C degrees each time you use it, you may only set the lower temperature(for example about 300C degrees) only if it’s high enough for you to trim interlayer remains, so you can prolong the life time of the blades, and save cost.

CNC02-Continuously-Working
Thermal Cutter
is able to trim the edges with minimum of smoke
and no burned marks
Peter Lin, cnc@cncGlass.com,
cnc@cncEVA.com
Whatsapp: 0086 15013829504,
WeChat: WeCan365
www.cncGlass.com www.cncEVA.com

Differences between CNC02 and CNC01:

*CNC02-Continuously-Working Thermal Cutter is designed for continuously working with air cooling system, while CNC01-Intermittently-Working is only for short time working, you need to release the button intermittently for cooling after short time heating in case itself gets too hot.

*CNC02-Continuously-Working is able to trim the edges with minimum of smoke and no burned marks.

*CNC02-Continuously-Working is lighter ,only 610g, easier to handle, while CNC01 is 950g.

*CNC02-Continuously-Working is availabe for high point temperature adjustment, 16 sections of temp to set. So you don’t need to let the blades going up to 500C degrees each time you use it, you may only set the lower temperature(for example about 300C degrees) only if it’s high enough for you to trim interlayer remains, so you can prolong the life time of the blades, and save cost.

CNC02-Continuously-Working
Thermal Cutter
is able to trim the edges with minimum of smoke
and no burned marks
Peter Lin, cnc@cncGlass.com,
cnc@cncEVA.com
Whatsapp: 0086 15013829504,
WeChat: WeCan365
www.cncGlass.com www.cncEVA.com

Differences between CNC02 and CNC01:

*CNC02-Continuously-Working Thermal Cutter is designed for continuously working with air cooling system, while CNC01-Intermittently-Working is only for short time working, you need to release the button intermittently for cooling after short time heating in case itself gets too hot.

*CNC02-Continuously-Working is able to trim the edges with minimum of smoke and no burned marks.

*CNC02-Continuously-Working is lighter ,only 610g, easier to handle, while CNC01 is 950g.

*CNC02-Continuously-Working is availabe for high point temperature adjustment, 16 sections of temp to set. So you don’t need to let the blades going up to 500C degrees each time you use it, you may only set the lower temperature(for example about 300C degrees) only if it’s high enough for you to trim interlayer remains, so you can prolong the life time of the blades, and save cost.


High Temp Polyester Green Masking Tape
Perfect for powder coating, plating,
anodizing and general painting
Extremely clean and easy removal.
Leaves no residue behind!
Rated up to 400 degrees!
Peter Lin, cnc@cncGlass.com, cnc@cncEVA.com,
Whatsapp: 0086 15013829504, WeChat: WeCan365.

HIGH TEMP MASKING TAPE KIT POWDER COATING
PAINT GREEN POLYESTER SILICONE
Heat resistant up to 400°F for 60 minutes
Cuts easily to any shape with a razor blade
Silicone adhesive does not leave a residue after curing
Excellent for masking during powder coating,
painting, Cerakote, anodizing, plating, etc.
Also great for sublimation and heat transfer work.

Peter Lin, cnc@cncGlass.com, cnc@cncEVA.com,
Whatsapp: 0086 15013829504, WeChat: WeCan365.